Vocopro DVG-777K II handleiding
Handleiding
Je bekijkt pagina 11 van 28
11
Getting Connected
RGB/Component Video HD Outputs
What you will need:
• 1 RGB cable
• A High-Definition TV with RGB or Component (Y, Pb, Pr) video inputs
1. Connect one end of the RGB/Y,Pb,Pr cable to the Y/R, Pb/G, Pr/B
jacks on the DVG-777K II’s rear panel
2. Connect the other end of the RGB/Y,Pb,Pr cable to the RGB or Y, Pb, Pr
inputs on a High Definition TV
NOTE: When using the Component output, the DVG-777K II must be set to
YPBPR output. See “Changing the Video Output Mode” in the Operations
section of this manual for detailed instructions on setting the DVG-777K II to
YPBPR Mode.
VGA output
What you will need:
• 1 VGA Cable
• A TV or video monitor with a VGA input
1. Connect one end of the VGA cable to the VGA output on the rear panel
of the DVG-777K II
2. Connect the other end of the VGA cable to a VGA input jack on a TV or
monitor
NOTE: When using the VGA output, the DVG-777K II must be set to VGA
output. See “Changing the Video Output Mode” in the Operations section
of this manual for detailed instructions on setting the DVG-777K II to VGA
Mode.
SCART
What you will need:
• 1 SCART cable
• A TV or video monitor with a SCART input
1. Connect one end of the SCART cable to the SCART output on the rear
panel of the DVG-777K II
2. Connect the other end of the SCART cable to a SCART input jack on a TV
or monitor
Bekijk gratis de handleiding van Vocopro DVG-777K II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vocopro |
| Model | DVG-777K II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2177 MB |
