Vocopro DVG-555K handleiding
Handleiding
Je bekijkt pagina 10 van 36
9
Getting connected cont
Connecting to a TV with Component Video
Using 3 appropriate Component Video cables (usually color coded red, blue and green), connect a set of
plugs to the COMPONENT VIDEO OUT jacks (Y/Cb/Cr) on the DVG-555K and plug the other set of plugs to
the COMPONENT VIDEO IN jacks (Y-U/Cb-V/Cr) on your television.
On some TVs, the component video input jacks may be labeled differently (i.e. Pr/Pb/Y or Cr/Cb/Y or R-Y/
B-Y/Y etc.). You will need to press the MODE button on the remote control to toggle between non-interlaced
(HDTV) and interlaced (STANDARD) video output. You can only use the MODE button when there is no disc
inserted in the disc tray.
Connecting to a Monitor using VGA
Using a VGA cable, connect one end to the DVG-555K’s VGA output jack and connect the other end to the
VGA IN jack on your HDTV/VIDEO monitor.
VIDEO CONNECTIONS
Connecting to a TV with S-video
Using an S-Video cable, connect one end to the DVG-555K’s S-VIDEO OUTPUT jack and connect the other
end to the S-VIDEO IN jack on your television.
Connecting to a Dolby Pro Logic Amplifier
Connecting to an TV with S-Video
Television
Connecting to an TV with Component Video Connecting to Monitor using VGA
VGA
Serial No
.
Manufactured under License from Dolby Laboratories
Manufactured under License from Dolby Laboratories
DOLBY PRO LOGIC and the double-D symbol are
DOLBY PRO LOGIC and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
trademarks of Dolby Laboratories. Confidential
Television/Monitor
Bekijk gratis de handleiding van Vocopro DVG-555K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vocopro |
| Model | DVG-555K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3152 MB |
