Vocopro DTX-5000G handleiding
Handleiding
Je bekijkt pagina 11 van 24
6
REAR PANEL
1
4
2
6 7
5
3
1. XLR /
1/4”
MIC (3) -
These combo jacks can be used to connect both a balanced low impedance (XLR)
microphone and an unbalanced high impedance (1/4”) microphone or line-level device. The 1/4” INPUT jack is
located in the middle of the jack housing. The XLR INPUT jack is located within the outer perimeter
of the jack housing.
NOTE:
For a dedicated KJ/DJ Mic that bypass’ the DSP Echo effect, use Mic channel 3 (see below).
2. MIC 3 ECHO ON/OFF –
This button is used to bypass, or prevent echo from being applied to MIC 3. When the
button is pressed in, echo settings will be applied to MIC 3. When the button is depressed, no echo set
tings will be applied to MIC 3. This feature is used mainly by KJ/DJ’s to make dry announcements.
3
. DIGITAL 1 & 2 OPTICAL (2) –
These inputs are for connecting digital devices with an OPTICAL cable.
Please make sure to remove the protective covers from these inputs prior to connecting an optical inputs.
NOTE:
When not using these inputs, keep the protective covers on to protect them from dust and
foreign material
.
4. DIGITAL 1 & 2 COAXIAL (2) –
These inputs are for connecting digital devices with a COAXIAL cable.
5. DIGITAL 1 & 2 OPT/COAX INPUT SELECTOR –
This switch toggles between the OPTICAL and COAXIAL input
jacks. Each digital channel has its own OPT/COAX INPUT SELECTOR. Use this switch to toggle between devices.
For example, if you have a device connected to OPT on DG1, you would set DG1’s OPT/COAX INPUT SELECTOR
to OPT.
6. NTSC/PAL VIDEO SELECTOR –
This switch toggles between NTSC and PAL video modes. In order for CD+G
graphics to display correctly, this switch must be set correctly. For North, South and Central America set this
switch to NTSC. For European countries, select PAL.
NOTE:
The NTSC/PAL switch is for the CD+G graphics monitor only.
7. VIDEO IN (3) -
These VIDEO IN jacks allow the video portion of A/V devices i.e. CD+G, VCD, DVD players to be
connected to the DTX-5000G. Connect RCA style cables or composite video cables from these jacks to the
VIDEO OUT jacks on you A/V devices.
NOTE:
The DTX-5000G’s CD+G decoder will not work with devices connected to these VIDEO IN jacks.
These VIDEO IN jacks are designed for devices without digital outputs.
Bekijk gratis de handleiding van Vocopro DTX-5000G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vocopro |
| Model | DTX-5000G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2940 MB |
