Vizio M50-D1 Handleiding (81 Pagina's)

Handleiding

3

55

Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.

1. From the Network menu, tap

Wireless Access Points. The

Wireless Access Points menu is

displayed.

2. Tap the name of your wireless

network (this is the network’s

SSID).

3. Use the on-screen keyboard to

enter your network’s password,

then tap CONNECT.

Your display is Internet-ready, featuring both an Ethernet port and built-in high-

speed Wireless-AC.

Using the Network Connection menu

Connecting to a Wireless Network

To connect to a wireless network whose network name (SSID) is being broadcast:

If your display is connected to a network with an Ethernet

cable, you will not see the wireless network connection menu.

You must disconnect the Ethernet cable to set up a wireless

network connection.

Changing the Manual Setup Settings

Advanced users can ne-tune the network settings using the Manual

Setup feature.

To manually change the settings:

1. From the Network menu, tap

Manual Setup. The Manual

Setup menu is displayed.

2. To change the settings manually,

tap on DHCP and select O.

3. Tap to adjust each setting:

• IP Address - The IP Address

assigned to the display.

• Subnet Mask - The subnet mask.

• Default Gateway - Your

network’s default gateway

address.

• Pref. DNS Server - Your preferred

domain name server address.

• Alt. DNS Server - Your alternative

domain name server address.

4. Tap SAVE in the top right corner

to save any changes.

Bekijk gratis de handleiding van Vizio M50-D1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.