Vivotek TB9332-E handleiding
Handleiding
Je bekijkt pagina 11 van 88
VIVOTEK Thermal Imaging Integrated Network Camera
User Manual
9
1.5.2 Installation Mode
The thermal imaging network bullet camera can be installed on the ceiling or the wall.
You can select the appropriate installation according to your requirements. If the
camera needs to be installed on the cement wall, you need to install the expansion
screws (the mounting holes of the screws must be consistent with that of the support),
and then install the support.
The wall where the support is mounted must be able to withstand at least three times
of the total weight of the support and the camera.
The different brackets have different installation methods, please choose the
corresponding method according to the purchased product.
1.5.3 Installing Camera With Junction Box
Step 1 Take out the installation location label from the package, stick it on the ceiling or the
wall. According to the location hole positions shown in the installation location label,
punch four location holes on the ceiling or the wall.
Step 2 Drive the plastic anchors into the holes, fix the junction box by self-tapping screws.
Fixing the Junction Box
Step 3 Wiring of junction box. Align the holes in bracket with the box and fix the camera to
the box with self-tapping screws.
Fix the Camera to the Junction Box
NOTE
Bekijk gratis de handleiding van Vivotek TB9332-E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivotek |
| Model | TB9332-E |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 10498 MB |
