Vivolink VLVWIP2000-CTL handleiding
Handleiding
Je bekijkt pagina 31 van 44
Reboot: Click the Reboot button to reboot the Decoder.
Replace: Click to replace the offline Decoder (which is in the system) with
an online Decoder (which is not in the system). The method to replace
Decoders is the same as the Encoder replacement.
Remove: Click the Remove button to remove the Decoder from the system.
Remove All: Click this button to remove all Decoders from the system.
Factory Reset: Click this button to restore the Decoder to factory settings.
Device
① Search Device: Click this button to search devices which are not in the
system.
② Search Device Via Wizard: Click this button to switch back to the IP
mode select interface and follow the Wizard to set up the system.
③ Add All Into System: Click this button to add all searched devices into
the system, then the devices will be listed on the Encoder/Decoder list.
⑦ Relay 1: Click the drop-down menu to select Open/Close Relay 1.
⑧ Relay 2: Click the drop-down menu to select Open/Close Relay 2.
25/37
JPEG2000 AVoIP Controller
Bekijk gratis de handleiding van Vivolink VLVWIP2000-CTL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-CTL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4456 MB |
