Vivolink VLVWIP2000-CTL handleiding
Handleiding
Je bekijkt pagina 28 van 44
22/37
Network Settings
① IP Mode: Click the drop-down menu to set the IP mode (Static/DHCP).
② IP Address: The IP address of the Decoder.
③ Subnet Mask: The Subnet Mask of the Decoder.
④ Gateway: The Gateway of the Decoder.
Note:
(1) If the IP mode is set to “Static”, you can manually set the IP Address,
Subnet Mask and Gateway as required. Then click “Apply”, the Decoder will
immediately reboot to take effect.
Step 2. Switch to the Matrix page and you will see a red frame on Decoder
004.
Step 3. Double-click the preview image of Decoder 004 to check the current
settings. The video source has been locked to Encoder 009, while other
signals still follow Encoder 001, as shown in the figure above. And you can
change the source of audio, IR, RS-232, USB and CEC in the same way.
In addition, you can click the drop-down menu of USB Data to select On/Off
to turn on/off the USB data.
JPEG2000 AVoIP Controller
Bekijk gratis de handleiding van Vivolink VLVWIP2000-CTL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLVWIP2000-CTL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4456 MB |
