Vivolink VLTOOL1 handleiding
Handleiding
Je bekijkt pagina 4 van 6
2025V1.0
must be powered on when it is used as a signal generator. When the
VLTOOL1 is used as a display emulator, it can be powered by HDMI
source, so the power cord connection is no required, if the HDMI
source has no enough power, both of the SIG LED and HDCP LED will
blink.
6. DIP SWITCH: When the VLTOOL1 is used as a HDMI signal
generator, switch 1 & 2 are used for built-in EDID (video) selection,
and switch 3 & 4 are used for HDCP content selection.
There are four switches (1~4). The switch represents “0” when in the
lower position, and it represents “1” while putting the switch in the
upper position.
Switch Status (1
& 2)
EDID
00
4K@60Hz 4:4:4
01
4K@60Hz 4:2:0
10
4K@30Hz 4:4:4
11
1080p@60Hz/3D
Switch Status (3
& 4)
HDCP
Test Pattern
00
HDCP 2.2
Red Screen
01
HDCP 1.4
Green Screen
10
HDCP OFF
Blue Screen
11
HDCP OFF
AlternateWB
System Diagram
Bekijk gratis de handleiding van Vivolink VLTOOL1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLTOOL1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 477 MB |
