Vivolink VLSC151H handleiding
Handleiding
Je bekijkt pagina 9 van 39
Compact Scaler Switcher (with PoH)
4
2.2 Rear Panel
① INPUTS
Video input ports: 1 HDMI/MHL input, 2 HDMI inputs, 1 DP and 1 VGA
Audio input ports: 1 DP external audio input and 1 VGA auxiliary audio input.
② OUTPUTS
HDMI output: HDMI video output port
③ MIC INPUT
MIC audio port: connect to Microphone.
Dial switch: including 3 level
48V phantom power mode (connect with condenser microphone);
MIC mode (connect with dynamic microphone);
LINE mode (connect with wireless microphone or line audio).
④ CONTROL
RES RESET: press this button to reset the output resolution to 1280×720p, or
activate HDMI output when they are closed.
IR EYE: Connect with IR receiver (with carrier wave only) to receive IR signal
send by IR remote to control this Scaler Switcher.
FIRMWARE: Type-A USB port for updating system firmware or loading
customized EDID data.
RS232: Serial port, 3-pin phoenix connector, connect with a control device
(such as PC) to control the Scaler Switcher.
TCP/IP: Ethernet port, connect with PC to control the Scaler Switcher via
GUI.
⑤ AUDIO OUT
Audio output port, the audio comes from the input audio corresponding to the
selected video source and is mixed with MIC audio.
⑥ DC 24V
Power port, connect with DC 24V power adapter.
Note: Pictures shown in this manual are for reference only.
DC 24V 48V
LINE IR EYE
MIC INPUT
MIC
FIRMWARE
AUDIO OUT
L R
RES RESET
RS232
Tx
Rx
INPUTS
OUTPUT
3-HDMI
2-HDMI1-HDMI / MHL 4-DP 5-VGA HDMI
CONTROL
1
2
3
4
5
6
Bekijk gratis de handleiding van Vivolink VLSC151H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vivolink |
| Model | VLSC151H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4074 MB |
