Vitamix Immersi-Prep handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 32
Care and Cleaning
151122
8
eaSy cleaning
Wash and rinse the Immersi-Prep prior to inital use and after each use with
a washing solution containing 8 ounces (.25 liters) of a non-abrasive and
non-corrosive cleaner (like Simple Green
®
all-purpose cleaner) and 4 gallons
(15 liters) of warm water (75F / 24C).
1. Unplug the power cord from a power outlet.
2. Rinse the blending wand and bell guard assembly under running water.
3. Submerge the blending wand and bell guard assembly 3/4 of its length in a
container with the washing solution and run for 30 seconds at high speed.
4. Rinse blending wand and bell guard assembly under running water again.
5. Wipe the blending wand with a clean, dry towel and let the bell guard
section air dry.
6. Remove the whisk beaters from the whisk gear housing.
7. Wash the whisk beaters in the washing solution and let air dry.
8. Wipe down the motor assembly, whisk gear housing, and pot clip with a
soft cloth dampened with mild soap and water only.
NOTES:
NEVER submerge the motor assembly, whisk gear housing, and pot clip in
water or place in the dishwasher.
The whisk beaters and blending wand can be washed in the dishwasher.
Contact Vitamix Customer Service to
order replacement parts or accessories:
Replacement Wand
Pot Clip
Whisk Attachment
Whisk Beaters (set of 2)
Sanitizing
Sanitize with a rinsing solution containing 12 teaspoons (59 milliliters) of institu-
tional or household bleach and 4 gallons (15 liters) of warm water (75F / 24C).
1. First perform the “Easy Cleaning” instructions.
2. Submerge the blending wand and bell guard assembly 3/4 of its length in a
container with the rinsing solution and run for 30 seconds at high speed.
3. Wash the whisk beaters in the rinsing solution and let air dry.
4. Allow the blending wand and bell guard assembly to air dry before use.
DO NOT rinse after sanitizing.
Storing
Store the Immersi-Prep motor assembly and blending attachments using the wall
mount bracket. Install using screws and plugs (not included) suitable for the wall
surface and the intended load. Follow local codes and seek professional advice
before installation to ensure the location and hardware will withstand the forces
generated.
NOTES:
NEVER store anything other than the motor assembly or blending
attachments on the wall mount.
NEVER lean or hang anything additional on the wall mount bracket.

Bekijk gratis de handleiding van Vitamix Immersi-Prep, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVitamix
ModelImmersi-Prep
CategorieBlender
TaalNederlands
Grootte3545 MB