Handleiding
Je bekijkt pagina 6 van 32
Use
151122
6
1. Test the power cord GFCI BEFORE each use:
a. Plug the power cord GFCI into a non-GFCI power outlet and verify the red indicator light is ON.
b. Press the TEST button and verify the red indicator light is OFF.
c. Press the RESET button and check if the red indicator light is ON.
• If the GFCI passes the test, then the GFCI plug is working properly.
• If the GFCI continues tripping after power is restored, there might be a risk of electric leakage.
Contact Commercial Technical Support at 800.886.5235.
2. Ensure the immersion blender motor is unplugged.
3. Attach the motor assembly to the blending wand or whisk attachment by lining up the channels and
making a one quarter turn counter-clockwise until secure. Turn clockwise to remove the wand or
whisk from the motor assembly.
WARNING! When blending hot liquids or ingredients in the container, use caution; spray or escaping
steam may cause burns.
4. Place food to be processed into a mixing bowl, container, or saucepan of appropriate size for the
blending wand selected (see the next page for blending volume ranges).
NOTE: The container should only be half full or less when blending liquids or when making a puree of fruit
and/or vegetables.
5. Install the pot clip (if being used) onto the powered o immersion blender by placing it through the
pot clip front groove. The weight of the appliance holds it in the pot clip. Then fully seat the pot rim
into the pot clip notch.
6. Lower the blending shaft to a maximum 2/3 of its length into the container with ingredients.
Ensure the bell guard and blades or whisk beaters are completely submerged in the ingredients.
WARNING
BLADES ARE EXTREMELY SHARP
Handle with extreme care to avoid injury.
TO AVOID DAMAGE AND INJURY
NEVER use an immersion blender in a Vitamix Container with a blade assembly.
Use caution when blending in a container, pot, pan, and on the stove top.
NEVER detach the wand or whisk from the motor assembly while the unit is plugged in. Unplug the unit before removing attachments.
Install the pot clip
onto the powered o
immersion blender by
placing it through the
pot clip front groove.
The weight of the
appliance holds it in
the pot clip.
Fully seat the
pot rim into the
pot clip notch
20 quart/ 5 gallon
pot shown for
illustration
purposes only.
Bekijk gratis de handleiding van Vitamix Immersi-Prep, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vitamix |
| Model | Immersi-Prep |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3545 MB |
