Handleiding
Je bekijkt pagina 6 van 32
Blending
6
149301
WARNING
To Avoid Injury. NEVER TOUCH MOVING PARTS.
Keep hands and utensils out of the container during appliance operation. NEVER insert fingers or utensils around the
blades while the blades are spinning.
NEVER fill the container above the “MAXIMUM CAPACITY” line to avoid risk of injury caused by damage to the lid and
container.
To avoid possible burns, NEVER start on speeds above Variable Speed 1 when processing hot liquids in a large container.
Escaping steam, splashes, or contents may burn. ALWAYS operate with the lid and lid plug in place and start on Variable
Speed 1, then slowly increase to 10.
Parts will become hot with extended use. NEVER touch the motor base drive socket or the drive spline in the blade base.
TIPS TO PREVENT OVERHEATING
• Process only Vitamix recipes when learning to use the appliance.
• NEVER process recipes at lower or higher speeds than recommended. Speed is indicated both numerically and visually by the
completion of the circular indicator around the number as illustrated below.
USER NOTIFICATIONS
• Overheating Notification - NEVER process recipes for longer than recommended. Over-processed blends can result in the incorrect
recipe texture and overheat the appliance. The temperature indicators help identify overheating conditions.
• Use Tamper Notification - Use the tamper to process thicker mixtures and keep ingredients moving around and through the blades.
The tamper indicators, available on the Ascent X4 and X5 models, help during recipe programs to determine the best times to use the
tamper. The tamper indicator is available for specific recipe programs and is not available when using Variable Speed.
The flashing thermometer
indicates the motor is
approaching overheating.
To avoid overheating,
increase to Variable Speed
10 or add more liquid to
make the blend thinner.
(Only on X4 & X5 Models)
The full thermometer in the
center of the display indicates
the motor is overheated.
Allow the motor to cool
for 20-45 minutes.
(All Models)
The partial thermometer in
the center of the display
indicates the motor has over-
heated. Allow the motor to
cool for 5-15 minutes and the
unit will return to ready state.
(Only on X4 & X5 Models)
The tamper icon indicates
the tamper will be needed
with this program
The flashing tamper with a
down arrow indicates the
tamper should be used now
Bekijk gratis de handleiding van Vitamix Ascent X4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vitamix |
| Model | Ascent X4 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 6520 MB |
