Handleiding
Je bekijkt pagina 8 van 32
BLENDING
8
149301
BLENDING IN THE CONTAINER
1. Press the On/O Switch on the lower right side of the motor
base (see page 5 for location) to the ON (I) position.
2. Load the container according to the Vitamix recipe direc-
tions or the Load Order Illustration.
Liquids
Dry Goods
Leafy Greens
Fruits & Veggies
Ice & Frozen
Ingredients
Load Order
Illustration
IMPORTANT! ALWAYS operate the appliance with the lid and lid
plug firmly in place when the machine is in operation. NEVER re-
move the lid while blades are rotating. Only remove the lid plug
to add ingredients and to use the tamper.
3. Place the lid onto the container:
• Push down on the lid until the two tabs snap onto the lip
of the container.
• Insert the lid plug and turn clockwise to lock it into the lid.
4. Place the container with lid onto the motor base and
Variable Speed 1 will display.
NOTES:
• Displays
on the control panel and the appliance will
not operate until a compatible container is properly posi-
tioned on the motor base.
• The appliance will run without a lid on the container, but
a lid MUST be attached to contain the ingredients during
processing.
5. TO USE VARIABLE SPEED:
a. Turn the dial clockwise to Variable Speed 1.
b. Press Start/Stop
and the blades will begin to turn.
The timer will count the minutes and seconds that the
blend has been processing.
c. Rotate the dial between Variable Speed 1 and 10 during
the blending cycle to increase or decrease the speed of
the blades.
d. At the end of the blend, press Start/Stop
to stop
the appliance.
TO USE PROGRAMS (X3 MODEL):
a. Press the desired program button.
b. The default program time and Variable
Speed setting will show on the display.
c. Press Start/Stop
to start the program. The appli-
ance will stop automatically at the end of the pro-
gram or press Start/Stop at any time to stop the
program.
TO USE PROGRAMS (X4 & X5 MODELS):
a. Press the Menu
button display the programs.
b. Rotate the Variable Speed Dial to the icon for the
desired program.
c. Press Start/Stop
to select and start the program.
The selected program icon will display along with the
processing time that the appliance will automatically
stop at, the speed, and if a tamper
will be needed during processing:
d. To increase the blend time by 15 seconds, use
the Add Time button on the control panel.
NOTE: The Add Time button can only be pressed two
times to add a maximum of 30 seconds to the blend
time as long as the run time does not exceed the max-
imum run time for the container to avoid motor over-
heating. Once the Add Time limit has been reached,
the following will appear on the display:
e. Press Start/Stop
at any time to stop the program.
6. If the mixture stops circulating or the “Use Tamper
Now” icon illuminates (0nly on X4 & X5 Models):
a. Remove the lid plug by turning it counter-clockwise,
insert the tamper through the lid plug opening, and stir
until the mixture ‘burps’.
b. If this does not work, press the On/O
Switch to
stop the motor.
c. Remove the container from the motor base, remove
the lid, and use a rubber spatula to press the air bubble
away from the blades.
d. Add liquid if necessary.
e. Replace the lid and lid plug and return the container to
the motor base and continue blending.
7. After blending, wait until the blades stop completely before
removing the lid or removing the container from the motor
base.
8. Use a Vitamix Under Blade Scraper or spatula to remove
salsa, jelly, jam, peanut butter, and other ingredients from
the container.
Bekijk gratis de handleiding van Vitamix Ascent X3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vitamix |
| Model | Ascent X3 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 6478 MB |
