Handleiding
Je bekijkt pagina 5 van 32
5
149301
PARTS AND FEATURES
Pulse
Display
Start/Stop
Dial
On/O
Programs
Add Time
ASCENT
X4 MODEL
Menu
Self-Cleaning
On/O Switch – Controls power to the machine and is
located on the lower right side of the motor base.
Display
• Two-Touch Operation - Requires two interactions of the
controls to activate the blending cycle.
• Container Detect – Displays
on the control panel
and the appliance will not operate until a compatible
SELF-DETECT container is properly positioned on the
motor base.
• Sleep Mode – Dims the screen if the control panel is
not used for 30seconds. To exit sleep mode, rotate the
Variable Speed Dial to the desired speed or program for
the next blend.
• Screen Saver - Displayed if the control panel is not used
for 60 seconds. To exit screen saver mode, rotate the
Variable Speed Dial to the desired speed or program for
the next blend.
• Error Code – Shows numbers on the display indicating
the appliance has a experienced a fault. Document the
error code number and contact Vitamix Household
Technical Support for resolution.
• Timer - Counts up when using variable speed until Start/
Stop is pressed. Each container is programmed with a
specific maximum run time. The blender will shut down
automatically when the maximum run time has elapsed.
• Programs – Operates the appliance for preset times and
will stop automatically at the end of the program.
When the Start/Stop
is pressed in the middle of a
program, the machine will stop and the program time
will reset on the display to the beginning of the run time.
Menu
– (Only on Ascent X4 & X5 Models)
Displays the available programs once the container is placed
on the motor base. Use the Variable Speed Dial to scroll
through the available programs. The Program Icons are
displayed in Vitamix recipes and can be found on page 7.
Self-Cleaning
- Runs the cleaning cycle after water and
dishwashing liquid have been added to the machine and the
lid and lid plug are in place. See page 9 for cleaning
procedures.
Add Time
– (Only on Ascent X4 & X5 Models)
Increases the program blend time by 15 seconds.
NOTE: The Add Time button can only be pressed two times
to add a maximum of 30 seconds to the blend time as long
as the run time does not exceed the maximum run time for
the container to avoid motor overheating. Once the Add
Time limit has been reached, the following will appear on
the display:
Pulse – Rotates the blade at the speed displayed on the
control panel when pressed and is located on the left side of
the control panel.
Variable Speed Dial - Provides manual speed control from
Variable 1 (slowest) to 10 (highest). On Ascent X4 & X5
models, the dial is also used to scroll through the program
options.
Start/Stop
– Starts or stops the blending at any time
and is located on the right side of the control panel.
Bekijk gratis de handleiding van Vitamix Ascent X3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vitamix |
| Model | Ascent X3 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 6478 MB |
