Visage 3 in 1 Trimmer 95597 handleiding
Handleiding
Je bekijkt pagina 19 van 46
Cleaning and maintenance
19
1. Switch off the trimmer.
2. Turn any previously used attachment counterclockwise
(bayonet catch) to remove it from the trimmer.
3. Align the eyebrow/beard attachment so that it can
be slotted into the bayonet catch. Twist clockwise to
secure the eyebrow/beard attachment (see Fig. I).
4. Position the trimmer on the area at a right angle and
slowly pull downwards. Repeat till desired trim
is achieved.
5. After use, slide the protective cap
9
from the top
downwards to be fully attached.
Attaching a guide comb
1. Make sure the trimmer is switched off and remove
the protective cap
9
.
2. Align the guide comb
5
so that it can be slotted onto
the eyebrow/beard attachment (see Fig. J).
3. Change the guide comb direction to adjust the
trimming length between 3 mm (0.12 inch) and 6 mm
(0.24 inch).
Cleaning and maintenance
Cleaning the trimmer
1. Make sure the trimmer is switched off.
2. Remove any attachment.
3. Use a soft, damp cloth to wipe off the trimmer.
4. Make sure all components are thoroughly dry before
attaching the protective caps
9
/
10
and storing.
For review R1
Bekijk gratis de handleiding van Visage 3 in 1 Trimmer 95597, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Visage |
| Model | 3 in 1 Trimmer 95597 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2434 MB |
