Vimar 40605 handleiding
Handleiding
Je bekijkt pagina 17 van 34
17
TAB: 40605
EN
4.1 General Information
• Primary Name (from master device only): to set the primary name associated with the user. When con-
guring the system, the installer assigns a preliminary name to the user (e.g. "Apartment 1"). The user
can change it later, by using the virtual keyboard on the screen to type and save the desired name (e.g.
"John Smith"). This is the name by which the user is identied in the system contact lists. The name is
displayed in the header area of the main screen on all video entryphones belonging to the user.
• Secondary Name and Additional Names (from master device only): to set the secondary name and any
additional names or information. Information about the user is displayed by the porter switchboard as
follows:
• Reset Names (from master device only): to reset the names to the default values (e.g. "Apartment 1"
for the Primary Name, and blank for the Secondary Name and Additional Name).
• Device ID: to set the ID by which an individual video entryphone is identied from among the user’s
devices. Each video entryphone has its own ID, which is automatically assigned during system con-
guration (e.g.: PI_60001 for the master device). The user can subsequently change it to a name of
their choice (Entrance, Study, etc.). In the Home section of the Contacts List, each of the user's video
entryphones is identied by its Device ID. In the main screen, the ID appears at the bottom, next to the
status icon.
• Language: select the language to be used by the video entryphone interface. The following languages
are available: Italian, English, French, German, Spanish, Greek and Portuguese.
• Date and Time (from master unit only): set the date and time displayed in the Header area of the
main screen on all video entryphones belonging to the user. Enabling automatic mode (recommended)
synchronises the video entryphones with the date and time of the video entryphone system. You can
also congure the time zone, time format (12 or 24 hours) and date format.
4.2 Display and Buttons
• Sound Buttons: to activate/deactivate sound feedback when pressing buttons and the screen.
• Button Brightness: to adjust the brightness of the button backlighting.
• Standby Button Light: to enable/disable button backlighting in standby.
• Display Brightness: to adjust the brightness of the display.
• Shutdown Timeout: to set the amount of idle time before standby.
Bekijk gratis de handleiding van Vimar 40605, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | 40605 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5902 MB |
