Vimar 16493.B Handleiding (147 Pagina's)

Handleiding

34

View Wireless

Search for repeater node

Search for a repeater device to allow the

magnetic contact to communicate on the

mesh network.

The operation may take a few seconds.

Search in progress

Search for repeater node

Search for a repeater device to allow the

magnetic contact to communicate on the

mesh network.

The operation may take a few seconds.

Check successfully completed!

The repeater node identiﬁed is:

Kitchen light

Add

BLE thermostat North window

LIVING ROOM

Devices

Step 2 of 5 - Add or edit your devices.

See how

 

Conﬁguration is now complete. The device association screen will now display the associated magnetic contact with the respective name and relevant environment.

"Sensors” mode.

Select "Sensors" and assign a name to the wired contact.

Wired contact

Choose which function to assign to the

wired contact.

If you choose not to conﬁgure it, you will

only continue with the magnetic contact

that will be conﬁgured in “Access”.

Do not conﬁgure

Access

Sensors

Wired contact name

Type in name

Wired contact name

Conditioner

 

Select to conﬁrm; the association procedure starts, and when it ends, the notiﬁcations relating device along with the type of activators can be set (the procedure is similar

to the Access mode).

In this case too, at the end of the conﬁguration process, the device association screen will display the associated magnetic contact with the respective name and relevant

environment.

Configuration

Bekijk gratis de handleiding van Vimar 16493.B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.