Vimar 01595 handleiding
Handleiding
Je bekijkt pagina 32 van 44
30
Specify the Common Access
You must enter all the programmers you want to use for interfacing.
After specifying the reference to the card programmers which are present, through the interface given by the system go to the WCS system configuration, as
detailed below.
Selecting Card Programmer, you will see what shown in Picture 48.
Selecting the Add Access button:
1. a window appears (see picture 49) for requesting the Environment Number, this field must be filled with the Environment Number of and environment
configured as "Common Access/Environment" (see the chapter ETS Configuration in the manual of the WCS software);
6. by confirming the entered data another window will open (see Picture 50) to insert the Management Access; this field must be filled
with the label used by the management software to identify the same common access (enter the numbers 1, 2, 3, ... , 30 nothing else.);
Picture 48 - Component for entering the Common Access
Picture 49 - Window for entering the number of the common
access as defined in the ETS Configuration
Bekijk gratis de handleiding van Vimar 01595, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | 01595 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4350 MB |
