Vimar 01595 handleiding
Handleiding
Je bekijkt pagina 13 van 44
11
Selecting the Add Programmer button, you will see a new row in the table as shown in Picture 12.
1. In the IP column, enter the address of the machine to which the card programmer is connected;
2. In the Port column, enter the port used by the programmer (typically 8001);
3. Select Use Encryption if you're actually using the encryption and when prompted (see Picture 13) enter the encryption key;
Picture 11 - Component for entering the Card Programmers' data
Picture 12 - Component for entering the Card Programmers with new programmer's line
Specifying Card Programmers parameters
You must enter all the programmers you want to use with “Micros - Fidelio”. After specifying the reference to the card programmers which are present, through
the interface given by the “Micros - Fidelio” system go to the WCS system configuration, as detailed below.
Selecting Card Programmer, you will see what shown in Picture 11.
Bekijk gratis de handleiding van Vimar 01595, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | 01595 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4350 MB |
