Vimar 01544 handleiding
Handleiding
Je bekijkt pagina 5 van 30
5
General features and functionality
GENERAL FEATURES AND FUNCTIONALITY
01544
FRONT VIEW AND CONNECTIONS
KNX DALI Gateway, 8 channels for 16 lamps per channel, installation on DIN rail (60715 TH35), occupies 6 modules size 17.5 mm
The gateway enables controlling DALI devices (eg electronic ballasts, transformers, etc.). It is equipped with 8 independent channels on which you can connect up to
16 DALI devices per channel; for individual channels or all the channels you can enable your choice of switching functions, dimming, fixed value, fault signalling, Lamp
stabilization time, and functions relating to lighting scenarios.
There is no need for separate DALI start-ups or manually assigning addresses for DALI devices.
Features
• Operating voltage: 85-265 V ~ 50/60 Hz, 110-240 V d.c.
• Consumption on the bus: 10 mA
• DALI outputs: 8 in compliance with IEC 60929
• Number DALI devices: Max. 16 per output
• Line length:Max. 300 m (line cross-section 1.5 mm
2
)
• Operating temperature: -5 °C - + 45 °C (inside)
• Protection rating: IP20
• 6 modules of 17.5 mm.
Connections
The connection is made directly from the terminals on the front of the gateway 01544.
1: Nameplate support
2: KNX Programming key
3: KNX Programming LED, red
4: KNX Connecting terminal
5: DALI LED, yellow
6: Operating LED, green
7: Operating voltage
8: DALI outputs, 2 screw terminals each
9: TEST key
max. 16 EVG
L3
L1
N
L2
PE
max. 16 EVG
L
1817
N
U
s
DALION
A
234
B
1
DA
- DA+ DA- DA+
C
678
D
5
DA
- DA+ DA- DA+
E
10 11 12
F
9
DA
- DA+ DA- DA+
G
14 15 16
H
13
DA
- DA+ DA- DA+
U
s
= 85 ... 265 V ~
110 ... 240 V
9
1
2
3
4
8
57 6
Operation
No special commissioning is necessary for the DALI devices. After connection of the operating voltage, the DALI Gateway automatically recognises the DALI operating
devices connected.
The assignment of the physical address and the setting of the parameters are performed with the ETS. Programming LED Lights up red when the device is operated in
programming mode (after pressing the Programming button).
LED indicators
• Configuration LED (3) steady red = gateway configuration phase
• DALI LED (5):
- steady yellow = DALI error
- blinking yellow = gateway in TEST mode
• ON operation LED (6) steady green = network power supply present and gateway working.
Bekijk gratis de handleiding van Vimar 01544, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vimar |
| Model | 01544 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5176 MB |
