Handleiding
Je bekijkt pagina 7 van 16
7
Settings and Functions
I n order for your new refrigerator to work properly, it is important that you understand its various features, controls, and how to use
them.
Power On/O Switch (Power Interruption Switch)
The power on/o switch is located behind your refrigerator’s top grille. Your refrigerator
arrives from the factory with the power interruption switch on. Turn the power o when
cleaning the refrigerator.
To turn power o , remove the center grille louver. Press the power on/o switch to the o
position.
To turn power on, press power on/o switch to the on position. Replace the center grille
blade.
IMPORTANT: Be sure the power on/o switch is in the on position after cleaning.
Power
Switch
FREEZER
FREEZER
MAX FRZ
MAX FRZ
MAX REF
MAX REF
F
FAST COOL
FAST COOL
SAB SHOW
SAB SHOW
REFRIGERATOR
REFRIGERATOR
DOOR OPEN
DOOR OPEN
POWER
POWER
HIGH TEMP
HIGH TEMP
C
Your refrigerator’s electronic controls are located behind the door above the cabinet interior. To activate the electronic control
panel, press “ACTIVATE CONTROLS” pad. All other pads, except the “ALARM OFF” pad, will remain inactive until the ”ACTIVATE
CONTROLS”pad is pressed. Once activated, pad remains programmable for at least ten minutes.
When you rst plug your new refrigerator in, you will nd that the refrigerator is factory set at 38° F in the refrigerator and 0° F in
the freezer. Wait 24 hours after plug-in for the cabinets to reach this setting. After 24 hours, you may adjust controls as desired.
To change from °F to °C, press and hold “ACTIVATE CONTROLS” then press and hold “ALARM OFF” for 3 seconds. To change back,
follow the same steps.
To adjust the refrigerator or freezer temperature, simply press the ”ACTIVATE CONTROLS” pad, then “Ref Temp” pad or “Frz Temp”
pad. Press the “HIGHER” or “LOWER” pad to adjust temperature setting one degree at a time.
Note: Allow 24 hours for temperature to reach desired setting after any change in set temperature.
Entry Tone
The entry tone is the “beep” you will hear when you press the control pad. You can deactivate the entry tone by pressing and
holding the ”ACTIVATE CONTROLS” pad for three to ve seconds. You will hear three short beeps to let you know that the entry
tone feature has been deactivated.
To activate the entry tone, simply press and hold the ”ACTIVATE
CONTROLS” pad for three to ve seconds.
Electronic Temperature Settings
Showroom mode allows electronic controls and interior lights to function independently of refrigeraton system.
To enter the showroom mode: Press and hold ”ACTIVATE CONTROLS” pad; while holding, press and hold the “HIGHER” and
“ALARM OFF” pads together for 3 seconds. Three beeps will sound and SHOW will be lit. Showroom mode is entered.
To exit the showroom mode: press and hold “ACTIVATE CONTROLS” pad; while holding, press and hold the “HIGHER” and
“ALARM OFF” pads together. Three beeps will sound and SHOW will no longer be illuminated. Control will revert to normal
operation and display.
Showroom Mode Initiation
Bekijk gratis de handleiding van Viking VCFB5304LAN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Viking |
| Model | VCFB5304LAN |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 1902 MB |
