Handleiding
Je bekijkt pagina 11 van 31
EN-11
Viking | RVL Panorama Cooktop & Downdraft
MVIDC6364B/6485B
Controlling the Cooktop
Switch On and O
Switching the cooktop on and o:
Switch on
Press and continue to hold for 2 sec
The display will light up
Switch o
Press
Display goes out
Switching a cooking zone on and o:
Set up Display
Slide from left to right on the slider
(slider operation for power)
0‐9
Switch o
0
H
Slide from right to left on the SLIDER until the
display shows
0
or
H
= "Hot".
If there is no control input within 20 seconds, the
electronics will return to the wait position.
Pan Detection
This cooktop is equipped with an interactive control
system that makes use of the cooktop even easier.
When you place a pan on the cooktop, it is automatically
detected. You will also see a
0
to show you which slider
to use for the zone in question. The pan detection ensures
optimum safety.
The induction cooktop does not work:
• If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to
put the power on and the symbol will appear on the
display.
• The operation is suspended when the pan is
removed from the cooking zone during cooking. The
symbol will appear on the display. The symbol
will disappear when the pan is placed back onto the
cooking surface. The cooking will then continue at the
same power level as selected previously.
Switch o the cooking zone after use. The pan detection
will no longer be active.
Bekijk gratis de handleiding van Viking MVIDC6364BBG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Viking |
| Model | MVIDC6364BBG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2848 MB |
