VigilLink VLKV-H2041 handleiding
Handleiding
Je bekijkt pagina 7 van 13
5 / 10
4.2 Rear Panel
No.
Name
Function Description
1
PC 1/2/3/4 ports
HDMI: HDMI signal input port, connected to HDMI source
device such as PC with HDMI cable.
USB HOST: USB Host port, connected to the same PC along
with HDMI port. (Note: The PC 1 USB HOST port can be
used for firmware upgrade.)
2
DISPLAY
HDMI port
HDMI signal output port, connected to HDMI display device
such as TV or Monitor with HDMI cable.
3
L/R audio port
3.5mm analog audio output port.
4
RS-232 port
3-pin phoenix connector, connected to a PC or control system
for serial port upgrade.
5
IR EXT port
IR signal receiving port, connected with 38KHz IR Receiver
cable. If the IR signal receiving window of the unit is blocked
or the unit is installed in a closed area out of infrared line of
sight, the IR receiver cable can be inserted to the “IR EXT”
port to receive the IR remote signal.
6
DC 12V
DC 12V/1A power input port.
4.3 IR Pin Definition
IR Receiver pin’s definition is as below:
IR Signal
Power
Grounding
IR RECEIVER
IR Receiver
PC 1
PC 2
PC 3
PC 4
HDMI
HDMI USB HOST
HDMI USB HOST
HDMI USB HOST
HDMI USB HOST
Bekijk gratis de handleiding van VigilLink VLKV-H2041, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLKV-H2041 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1273 MB |
