VigilLink VLIP-JP1G-CTRL handleiding
Handleiding
Je bekijkt pagina 53 van 55
So to make AV network as an independent network which can not be accessed from
control network directly it’s for bringing network security and avoiding AV network
trac owing into the network in which the controls and managements are for the
IP system.
The strongly recommended system setup is connecting Video LAN and Encoders/
Decoders in a network Switch, connecting Control LAN and PC in another network
Switch. The controls from Control LAN can be achieved by Web GUI/Telnet or SSH
login/API commands, all these controls can be bridged by the Controller and applied
onto Video LAN. The two LANs are isolated.
For simple usage, you can only connect all Encoders/Decoders and Video LAN and
PC RJ-45 port into a single network, and let the Control LAN port not-connected
(oating), as Video LAN also supports Web GUI/Telnet or SSH login/API commands
controls, this seems “convenient” for general use scenarios, but this is only
suggested for system in which there is no network isolation requirement or network
trac non-sensitive.
Only Control LAN connected while Video LAN oating, this is not allowed.
(2) For the default IP mode of Control LAN port of the Controller Box is DHCP, the
PC also needs to be set to “Obtain an IP address automatically” mode, and an
optional DHCP server (e.g. network router) is recommended in the system.
(3) If there is no DHCP server in the system, 192.168.6.100 will be used as the IP
address of Control LAN port. You need to set the IP address of the PC to be in the
same network segment. For example, set PC’s IP address as 192.168.6.88.
(4) You can access the Web GUI by inputting URL “http://controller.local” or the
Control LAN port IP address 192.168.6.100 (in case of no optional router) on your
computer’s browser.
(5) No need to care about settings of Video LAN port of the Controller Box, as they
are managed by Controller automatically (Default).
(6) When the Network Switch does not support POE, the Encoder, Decoder and
Controller Box should be powered by DC power adapter.
53
Bekijk gratis de handleiding van VigilLink VLIP-JP1G-CTRL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLIP-JP1G-CTRL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4882 MB |
