VigilLink VLIP-JP1G-CTRL handleiding
Handleiding
Je bekijkt pagina 49 van 55
2. Control Network: The network port conguration of the
Controller connected to the router, PC directly or network
Switch in where the PC for control is. When DHCP is set to
“O”, you can manually set the IP Address, Subnet Mask and
Gateway as required, then click “Apply” to take eect.
When DHCP is set to “On”, the system will search and ll the
IP Address with the one assigned by the router automatically.
Note: When DHCP is set to “O” which is in Static IP mode, the network settings
of Control LAN and PC should stay in same network segment. Otherwise, the
controller Web GUI can not be accessed from PC until you change PC network
settings in same network segment.
3. Video Network: The network port conguration of the
Controller connected to the network where the Encoders and
Decoders stay. When DHCP is set to “O”, you can manually
set the IP Address, Subnet Mask and Gateway as required,
then click “Apply” to take eect. When DHCP is set to “On”,
the system will search and ll the IP Address with the one
assigned by the router automatically.
49
Bekijk gratis de handleiding van VigilLink VLIP-JP1G-CTRL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLIP-JP1G-CTRL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4882 MB |
