VigilLink VLIP-JP1G-CTRL handleiding
Handleiding
Je bekijkt pagina 33 van 55
And you can change the source of audio, IR, RS-232, USB and CEC in the
same way. In addition, you can click the drop-down menu of USB Data to
select On/Off to turn on/off the USB data.
Network Settings
1. IP Mode: Click the drop-down menu to set the IP mode
(Static/DHCP).
2. IP Address: The IP address of the Decoder.
3. Subnet Mask: The Subnet Mask of the Decoder.
4. Gateway: The Gateway of the Decoder.
Note:
(1) If the IP mode is set to “Static”, you can manually set the IP Address, Subnet
Mask and Gateway as required. Then click “Apply”, the Decoder will immediately
reboot to take eect.
(2) If the IP mode is set to “DHCP”, it will search and be lled with the IP Address
assigned by the router automatically.
(3) If the Decoder is actually alive in the system but with incorrect network
segment settings, even though the Decoder is oine, its network settings including IP
address can be changed and set.
33
Bekijk gratis de handleiding van VigilLink VLIP-JP1G-CTRL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLIP-JP1G-CTRL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4882 MB |
