VigilLink VLIP-JP1G-CTRL handleiding
Handleiding
Je bekijkt pagina 28 van 55
RS-232 Settings
1. RS-232 Command Relay: Click the drop-down menu to
select On/O to turn on/o the RS-232 command relay
function.
2. Parity: Click the drop-down menu to set the parity.
3. Baud Rate: Click the drop-down menu to set the baud rate.
4. Data Bits: Click the drop-down menu to set the data bits.
5. Stop Bits: Click the drop-down menu to set the stop bits.
After setting, click “Apply” to take eect.
Port Settings
1. IR Voltage: Click the drop-down menu to select the 5V/12V IR
voltage.
2. IO Voltage: Click the drop-down menu to select the 5V/12V IO
voltage.
3. IO 1 Direction: Click the drop-down menu to set the IO 1 direction
(Input/ Output).
4. IO 1: Click the drop-down menu to set the IO 1 level (Low/High).
5. IO 2 Direction: Click the drop-down menu to set the IO 2 direction
(Input/ Output).
6. IO 2: Click the drop-down menu to set the IO 2 level (Low/High).
7. Relay 1: Click the drop-down menu to select Open/Close Relay 1.
8. Relay 2: Click the drop-down menu to select Open/Close Relay 2.
Connecting for a Smarter Future
28
Bekijk gratis de handleiding van VigilLink VLIP-JP1G-CTRL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLIP-JP1G-CTRL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4882 MB |
