VigilLink VLDT-AP0808 handleiding
Handleiding
Je bekijkt pagina 24 van 39
- 22 / 37 -
THRESHOLD: Shows that level signals above threshold will be attenuated, with a scale of
[-60.0, 0.0] dB.
RELEASE: The time required by the Limiter to stop the LIMITER process once a signal is
below threshold, with a scale of [1, 1000] ms.
G.R. (Gain Reduction): Shows the amount of gain attenuation of the input signal, measured
in dB.
OUT: Meter indicates output signal level after the LIMITER process.
ACTIVE: When pressed, you will activate/inactivate the function of the Limiter module.
The function is equivalent to clicking the green letter A at the LIM module on the HOME
page.
You can also click the UP/DOWN arrow on the right panel of the setting page to select an
output channel for the LIMITER configuration.
5.17 Scene Management
Up to 8 scenes are available to be managed in this audio processor. By clicking “Tools”>
“Scene” on the menu bar, you will enter the setting page as shown below.
Load: When pressed, the scene saved in this processor will be exported.
Upload: When pressed, the configuration file saved in the host computer will be sent to
the processor. The UPLOAD function is equivalent to clicking the OPEN icon on the tool
bar as shown below.
The processor can only read XML configuration files.
Download: When pressed, the present scene will be downloaded to the host computer.
The DOWNLOAD function is equivalent to clicking the SAVE icon on the tool bar as shown
below.
Bekijk gratis de handleiding van VigilLink VLDT-AP0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLDT-AP0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6379 MB |
