Handleiding
Je bekijkt pagina 39 van 65
39User Manual Visit the ViewZ USA website at https://www.viewzusa.com
3. Camera Tamper
INTELLIGENT ANALYSIS
Function Settings
Deployment Time Settings
Alarm Interval
Enable
Output Channel
(1-1800s) Enter a value in the area box.
Click the parameter and input an ID.
[How to set]
[Default Value] OFF
[How to set]
[Default Value] 10
is generated again in next intervals (alarm interval)
is connected to an external alarm indicator, the alarm
until the end of event (lasts 30 second).
indicator signals when an alarm is triggered.
Setting range: 1-30 seconds.
An alarm is generated when camera tamper occurs, it
Camera temper ON / OFF
If you check to set the Output Channel and the device
SengParameter DESCRIPTION
Table 4-3 Description of Parameters for Camera Tamper
Seng deployment me: Click to select any me point within 0:00-24:00 from Monday to Sunday; or hold
down the le mouse buon, drag and release the mouse to select the deployment me within 0:00-24:00
from Monday to Sunday, and then click Apply to successfully set the me. Note: When you select me by
dragging the cursor, the cursor cannot be moved out of the me area. Otherwise, no me can be selected.
Deleng deployment me: Select the week on the le of set me which becomes red aer selecon, as
shown in Figure 4-8, and then click Delete to delete the deployment me. You can also delete selected
deployment me by means of inverse selecon.
SMTP [Default Value] OFFIf you turn on, system will send a notice email.
You can set the email on Network Service / SMTP.
Figure 4-8 Deployment Time Setting Interface
Bekijk gratis de handleiding van ViewZ VZ-PVM-I3B3N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ViewZ |
| Model | VZ-PVM-I3B3N |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 14175 MB |
