Handleiding
Je bekijkt pagina 24 van 26
24 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
At start
We recommend you to test with dierent input source when you have trouble with
current input source. If symptom persists, follow the instrucons below. Aer following
the instrucons below, please contact us at 1-888-99-VIEWZ.
TROUBLESHOOTING GUIDE
- Check the following before calling for service.
- If the same problems connue aer checking, contact the reseller you purchased the monitor from.
No image or
Noise on the screen
Incorrect display or
Half display
Flickering and
shadow image
LED is ickering
or no image
The audio funcon is
not working
- Check power cable is correctly plugged in to the outlet
- Check power cable is correctly plugged into the monitor
- Check HDMI cable is correctly connected between monitor & source
- Check to make sure DPMS mode is on/o
If the monitor screen is RED, that means the monitor is on DPMS mode
- Adjust brightness and check to see if brightness is set to 'Ø'
- Check video source
Video source causes blank screen if video source could not support UHD resoluon
(3840x2160)
- Check your video source
- Reset video source : connecon, cable replacement, seng & more
- Check your input source setting regarding resolution and phase (Hz)
- Check the interface cable connecon (plug in)
- Check DMPS mode of VZ-50UHD and input source
- Check the volume, MUTE on/off
- Check HDMI / Display port cable connection
Bekijk gratis de handleiding van ViewZ VZ-50UHD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ViewZ |
| Model | VZ-50UHD |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 8505 MB |
