Handleiding
Je bekijkt pagina 14 van 19
1
- Auto -
Select [On], the monitor can automatically adjust the position of the image. Select [Off], users can
manually adjust the position of the image.
- Phase-
Adjust internal phase sequence difference. Adjustable range: 0-100.
- Clock -
Adjust internal oscillation frequency when interference occurs. Adjust this item, the image can be
compressed or stretched left or right. Adjustable range: 0-100.
- H-Position -
Horizontally adjust the position of the image on the screen. Adjustable range: 0-100.
- V-Position-
Vertically adjust the position of the image on the screen. Adjustable range: 0-100.
Note! Only available under VGA mode.
2-2-5. AUDIO
- VGA, VIDEO mode - - SDI mode - - HDMI mode -
- Volume -
To adjust the volume from [0]-[100] for the built in speaker and earphone jack audio signal.
- Level Meter -
The left side of the on screen meters displays level meters showing audio levels for channels 1 and 2 of the
input source. It features peak hold indicators which stay visible for a short time so the user can clearly see
the maximum levels reached.
To achieve optimum audio quality, ensure the audio levels do not reach 0. This is the maximum level,
meaning that any audio that exceeds this level will be clipped, resulting in distortion. Ideally peak audio
levels should fall in the upper end of the green zone. If the peaks enter into the yellow or red zones, the
AUDIO
Volume
0 - 100
Level Meter
OFF, ON
Audio Channel
CH0&1, CH2&3, CH4&5, CH6&7, CH8&9, CH10&11,
CH12&13, CH14&15
Bekijk gratis de handleiding van ViewZ VZ-215LED-HDR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ViewZ |
| Model | VZ-215LED-HDR |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 5127 MB |
