Handleiding
Je bekijkt pagina 15 van 31
14
Safety Marker
Use this setting to set off the safety marker or choose the one of the safety
markers: [OFF], [95%], [93%], [90%], [88%], [85%], [80%].
Aspect Marker
Display the different aspect of the displayed image. [OFF], [Full], [17:9], [16:9],
[4:3], [1.85:1], [2.35:1].
Aspect
Switch aspect ratio setting among from [Full][17:9][16:9][4:3][1.85:1][2.35:1].
For example:
In [Full] mode, images are scaled to fill the entire screen.
In [4:3] mode, images are scaled up or down to fill the maximum 4:3 portion of
the screen.
In [16:9] mode, images are scaled to fill the entire screen if the device aspect is
16:9.
Underscan
If the image shows size error, use this setting to zoom in/out pictures
automatically when receiving HDMI signals
Pixel to Pixel
The pixel to pixel is a monitor set to 1:1 pixel mapping with native fixed pixels,
which avoids loss of sharpness due to scaling artifacts and normally avoids
incorrect aspect ratio due to stretching.
Check Field
Use the check field modes for monitor calibration or to analyze individual color
components of an image. The device preset in Blue, Green, and Red check
field modes, only the selected color will be shown.
Peaking
The peaking is used to aid the camera operator in obtaining the sharpest
possible picture. Select "On" to display colored outlines around sharp areas of
the image.
NOTE: Peaking color and level only can be changed when under SDI mode.
Bekijk gratis de handleiding van ViewZ VZ-156PM-4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ViewZ |
| Model | VZ-156PM-4K |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 6704 MB |
