Handleiding
Je bekijkt pagina 11 van 40
3. Menu Setting
Before setting the functions, please make sure the device is connected correctly.
3.1 Shortcut keys
3.1.1 Menu Knob
Power on the monitor, press Menu Knob to display OSD, and select options as the following
sequence via rotating it: PICTURE/ MARKER/ FUNCTION/ WAVEFORM/ AUDIO/ REMOTE/ SYSTEM.
Press Menu Knob to enter the desired function, rotate it to change the value/ option, and press
Menu Knob or Exit again to confirm the changes.
Functions of Menu Knob can be customized: [Back Light], [Brightness], [Contrast], [Saturation],
[Tint], [Sharpness], [Volume], [Peaking Level]. After setting the Knob’s customized function, rotating
it can display the function, and rotating it again can adjust the value. Press it to switch to the next
option in turn. Default option: [Volume].
3.1.2 F1-F2-F3-F4 Buttons:
Long press any F1-F2-F3-F4 buttons for 3-5 seconds to pop up shortcut menu on
the screen. As shown in Figure. Select option via rotating the Menu Knob, and set
it as default via pressing the Knob, then press Exit button to exit shortcut setting
menu. The customized function will be remembered by F1/F2 buttons.
Functions of F1-F2-F3-F4 buttons can also be customized: [Center Marker],
[Aspect Marker], [Safety Marker], [Overscan], [Scan], [Aspect], [Color Space],
[Gamma], [Camera Log], [Check Field], [H/V Delay], [Freeze], [Color Bar],
[Peaking], [False Color], [Exposure], [Histogram], [Waveform], [Vector], [Time
Code], [Mute], [Level Meter], and [ Audio Vector].
Default function: F1: [Peaking] F2: [Waveform].
F3: [Level Meter] F4: [Color Space ].
Bekijk gratis de handleiding van ViewZ VZ-156PM-12G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ViewZ |
| Model | VZ-156PM-12G |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 12730 MB |
