Videotec NXPTH handleiding
Handleiding
Je bekijkt pagina 11 van 54
Pag. 7 MNVCNXPTH_1511_EN
Preset connection to DTRX3 receiver
Where to operate: J1 terminal block in the horizontal movement circuit of the pan & tilt motor (see drawing 2A)
or 3+1 poles connector (see drawing 2B), terminal block of preset (see DTRX3 manual)
Adjustments: connect the J1 terminal block of the pan & tilt motor to the terminal block of the DTRX3 preset according
to the following table:
Fig. 2A Fig. 2B
Connection to DTRX3 receiver Terminal block J1 on Pan & Tilt 3+1 poles connector
Vcc Vcc 1
Pan Pan 2
Tilt Tilt 3
Gnd Gnd
Switching on and off
Before connecting the appliance:
check that the material supplied corresponds to the specifications indicated on the data plate, following the chapter
Identification data
check that NXPTH pan & tilt motor and the other components of the installation are closed
in order to avoid direct
contact with energized parts.
make sure that all the parts are fixed in a solid and reliable way
check that the electrical capacity and the connection cables will support the system power consumption
Maintenance
NXPTHpan & tilt motors do not need a special maintenance.
Make sure they always rest on a solid base, and that the power supply and connection cables do not hinder the
operator.
Problem solution
Even if NXPTH pan & tilt motors are very easy to use, some problems may arise during installation, configuration or use.
Problem Possible cause Remedy
The receiver is working, but
the pan & tilt motor does not
respond
Incorrect connections Check the connections between the pan &
tilt motor and the control unit
The voltage supplied by the
control unit is different from that
required by the pan & tilt motor
Check the identification data of the control
unit and of the pan & tilt motor
The pan & tilt motor
responds to the controls but
the PRESET does not work
Incorrect connections Check the connections between the pan &
tilt motor and the DTRX3 receiver
Bekijk gratis de handleiding van Videotec NXPTH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Videotec |
| Model | NXPTH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6790 MB |
