Videotec HTV handleiding
Handleiding
Je bekijkt pagina 7 van 76
Instruction manual - English - EN
5MNVCHTV32_2222_EN
• This device was designed to be permanently
secured and connected on a building or
on a suitable structure. The device must be
permanently secured and connected before any
operation.
• Comply with all the national standards during the
device installation.
• Installation category (also called Overvoltage
Category) specifies the level of mains voltage
surges that the equipment will be subjected
to. The category depends upon the location
of the equipment, and on any surge voltage
protection provided. Equipment in an industrial
environment, directly connected to major
feeders/short branch circuits, is subjected to
Installation Category III. If this is the case, a
reduction to Installation Category II is required.
This can be achieved by use of an insulating
transformer with an earthed screen between
primary and secondary windings, or by fitting
UL listed Surge Protective Devices (SPDs) from
live to neutral and from neutral to earth. Listed
SPDs shall be designed for repeated limiting of
transient voltage surges and the following rated
operation conditions: Type 2 (SPDs permanently
connected to the power network and intended
for installation on the load side of the service
equipment); Nominal Discharge Current (In)
20kA min. For example: FERRAZ SHAWMUT,
STT2240SPG-CN, STT2BL240SPG-CN rated
120Vac/240Vac, (In=20kA). Maximum distance
between installation and reduction is 5m.
• Any device which could be installed inside the
product must comply with the current safety
rules.
• For all connections, use cables that are able to
withstand temperatures of at least 75°C (167°F).
• The product is designed to house only cameras
that are properly certified according to IEC/UL
60950-1 or IEC/UL 62368-1 (7W max).
• A power disconnect device must be included
in the electrical installation, and it must be very
quickly recognizable and operated if needed.
4 Identification
4.1 Product description and type
designation
This housing has been designed to fit thermal
cameras with compact lenses for vision even in total
darkness.
It can be used for a wide range of day/night
surveillance systems, such as monitoring and
rescue in the event of a fire, public safety or airport,
industrial and environmental surveillance.
The frontal opening system allows an easy access to
the camera and all internal connections.
A wide range of accessories for mounting the
equipment is available thereby satisfying all
installation needs.
4.2 Product marking label
See the label attached to the product.
Bekijk gratis de handleiding van Videotec HTV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Videotec |
| Model | HTV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6680 MB |
