Victron Energy EV Charging Station NS handleiding
Handleiding
Je bekijkt pagina 23 van 38
6. GX device setup, configuration and operation
6.1. Modbus TCP activation
The EV Charging Station NS communicates with the GX device via Modbus TCP. This must first be activated in the GX device
and is a mandatory step.
• In the GX device, go to Settings → Services → Modbus TCP and enable Modbus TCP.
Activate the charging station in the Modbus TCP/UDP menu
This step is only required if it is an EV Charging Station NS that has not already been connected to the GX device AND the GX
device has firmware version 3.12 or higher.
For devices that were already connected to the GX device before a GX firmware update to Venus OS 3.12, this step is not
necessary. These units are activated automatically.
• In the GX device, go to Settings → Modbus TCP/UDP → Discovered devices and activate the EVCS.
6.2. Setup menu and options
As soon as Modbus TCP has been activated, the EVCS appears in the device list and displays the current mode and charging
state.
Highlight the EVCS then press spacebar or cursor right to enter the next menu and at the setup menu item press spacebar again
to enter the setup menu. See the EV Charging Station setup [14] and the Description [2] chapter for the meaning of the available
options.
Manual - EV Charging Station NS
Page 20
GX device setup, configuration and
operation
Bekijk gratis de handleiding van Victron Energy EV Charging Station NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Victron Energy |
| Model | EV Charging Station NS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4132 MB |