Victron Energy EV Charging Station NS handleiding
Handleiding
Je bekijkt pagina 14 van 38
5.1.2. First setup via VictronConnect
The first setup is even easier via VictronConnect.
1. Open VictronConnect and find the entry for your EVCS (EVCS-HQXXXXXXXXX).
2. Tap on EVCS. This will start the pairing dialogue. Enter the pairing code which is a unique number on a sticker inside the
housing.
3. If pairing was successful, the status page will appear; ignore the page for now (using the EVCS is not yet possible) and tap
the cog wheel icon in the upper right to open the Settings page.
4. Go to the Network settings and tap on it.
5. One of the following parameters must be changed to complete the first setup and start using the EV:
I. Selected network mode: Access Point
The unit creates its own WiFi access point. This is either for setting up the unit or in the absence of a separate WiFi
network including a GX device.
If sticking with AP mode, then change at least the Access Point SSID, the Access Point passphrase or the Access Point
IP address in the Wireless Access Point settings.
II. Selected network mode: Connect to local WiFi
Connects the device to a WiFi network that includes other Victron devices like a GX device or VRM.
Manual - EV Charging Station NS
Page 11 Setup
Bekijk gratis de handleiding van Victron Energy EV Charging Station NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Victron Energy |
| Model | EV Charging Station NS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4132 MB |