Vevor ZX0901 ITEM 50T handleiding
Handleiding
Je bekijkt pagina 3 van 80
IMPORTANT SAFEGUARDS
WARNING: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE
SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
SPECIFIC PRODUCT WARNINGS
1.
Do not operate the Shop Press beyond rated capacity.
2. Warning! If you detect anything that may indicate imminent structural
failure of the Shop Press, discontinue use immediately.
3. Do not install this equipment on any asphalt, wooden, soft or tiled surface.
Make sure the Shop Press is firmly secured to a dry, oil/grease free, flat, level
concrete surface capable of supporting the combined weight of the Shop
Press, the work piece being pressed, and any additional tools and equipment.
Do not install the Shop Press on expansion seams or on cracked, defective
concrete.
4. Maintain a safe work environment. Do not use the Shop Press near wet
areas and do not expose to moisture. Make sure there is adequate
surrounding work space. Do not operate in the presence of flammable liquids,
gases, or dust.
5. Read and understand all instructions and safety precautions in the
manufacturer’s manual for the work piece you are pressing, when applicable.
Always use the manufacturer’s recommended pressing points, minimum/
maximum pressing force required, etc. for the work piece you are pressing.
6. Avoid off-center loads. If the Jack Plate seems unusually hard to press,
immediately stop the operation. Adjust the work piece to eliminate or diminish
an off-center load. Do not operate the Shop Press if the work piece tilts or
binds during the down movement of the Pressure Head Assembly.
7.
Prior to lowering the Jack Plate remove tool trays, stands, and all other tools
and equipment from the Press Apron.
8. Always keep hands, fingers, and feet away from the Jack Plate and Press
Apron during the pressing process. Make sure the Jack Plate(s) are in good
condition before use.
9. Never attempt to remove a work piece stuck in the moving parts of the
Shop Press. Unscrew the Release Valve and, only after returning the Jack
Bekijk gratis de handleiding van Vevor ZX0901 ITEM 50T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | ZX0901 ITEM 50T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9741 MB |
