Vevor SJY-HGG1M handleiding
Handleiding
Je bekijkt pagina 11 van 20
OPERATING INSTRUCTIONS
1.Plug in the power and press the power key on the control box.
2.Set the desired time and temperature (e.g., 160℃/15 seconds) as needed, or
refer to the material instructions or recommended values.
3.Turn the pressure micro-adjustment knob clockwise to decrease pressure,
counterclockwise to increase.
4.Wait for the heated plate to reach the set temperature. The buzzer will sound.
5.Pull out the support plate and lay the garment or item flat on the platform.
6.(Optional) Lift the handle and preheat the platform for about 10 seconds before
arranging the garment.
7.Place the transfer material (transfer paper/film) face down accurately on the
desired position.
8.Push the support plate back in.
9.Lift the handle to the preset position, press the start button (START/MODE), and
the machine will automatically countdown and heat press.
10.When the countdown ends and the buzzer sounds, slowly lower the handle to
release pressure.
11.Pull out the support plate, remove the item, allow it to cool, then peel off the
transfer film and check the result.
12.After each use, always lift the handle to its upright (vertical) storage position.
This prevents the handle from obstructing walkways and reduces the risk of
accidental bumps or injuries to users and passersby, ensuring a safe operating
environment.
10
Bekijk gratis de handleiding van Vevor SJY-HGG1M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | SJY-HGG1M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3061 MB |
