Vevor SD-003 handleiding
Handleiding
Je bekijkt pagina 5 van 70
- 5 -
4. Manual peeling
Hold the handle of the stripping machine and rotate it slowly to insert
the cable into the middle of the inlet so that the blade cuts into the
cable sheath.Continue rotating the handle until the cable sheath is
completely cut.Then, remove the cut cable jacket, exposing the inner
metal conductor.Note: When stripping cables with wire diameter ≤5mm,
it is necessary to install a pressure plate. When stripping diameter
greater than 5mm cable，need to remove the pressure plate, and to
fixed the machine.Operate as shown below.
5. Repeat operations
Repeat as necessary until stripping of all cables is completed.
3. Attention
1. Safe operation
When operating the mini cable recycling manual stripping machine,
be sure to wear appropriate protective equipment, such as gloves
and goggles, to protect yourself.Avoid direct contact with blades to
prevent scratches or cuts.
Bekijk gratis de handleiding van Vevor SD-003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | SD-003 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7760 MB |
