Vevor RC-9001C handleiding
Handleiding
Je bekijkt pagina 5 van 64
- 4 -
Cutter Tool
Applications
Arrow Cutter
Starting tool; ideal for cutting and scraping
Boring Bulb Cutter
Starting tool; ideal for removing loose objects
C-Cutter
Finishing tool; ideal for grease stoppages and
cleaning pipe walls.
Spade Cutter
Finishing tool; used for scraping the inside edges of
pipes.
NOTICE: If the cause of the obstruction is unknown, use the Boring Bulb
Cutter to explore the obstruction and, if possible, retrieve a piece to inspect.
Once you can see the cause of the obstruction, select the appropriate tool for
the job. Run the smallest available tool through the blockage to allow the
backed up water to flow and carry away the debris as the drain is cleaned.
Once the drain is flowing, more appropriate tools can be used on the rest of
the blockage.
Keep in mind that the largest tool used should be no bigger than the
drain’ s inside diameter, minus an inch.
If properly used, the Drain Cleaners and assorted Drain Cleaner
Accessories will not damage a drain that is in good condition and properly
designed, constructed, and maintained.
However, if the drain is in poor condition or has not been properly designed,
the drain cleaning work may damage the drain. If possible, visually inspect the
drain’ s quality before operation.
If needed, place protective covers over the work area floor. Cleaning the
clogged drain can be a messy operation.
Make sure that the Drain Cleaner handle is locked into the upright position
for transport. If the Drain Cleaner needs to be lifted, use proper lifting techniques
or seek assistance if needed. Use caution when moving equipment up and down
stairs. Wear appropriate footwear to help prevent slipping on floor.
Set the Drain Cleaner so that the drum opening is within 2 feet of the drain
access. The greater the distance from the drain access, the higher the risk of the
cable twisting or kinking.
If the machine cannot be placed with the drum opening within 2′of the drain
access, use appropriate-sized pipes and fittings to extend the drain access back
to within 2′ of the drum opening. Improper cable support can allow the cable to
kink and twist and can damage the cable or injure the operator.
If needed, set up barriers to keep bystanders away from the Drain Cleaner and
work area during operation.
Select proper cutting tool. (See Cutting Tool Accessories ).
Bekijk gratis de handleiding van Vevor RC-9001C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | RC-9001C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8726 MB |
