Vevor RC-22 handleiding
Handleiding
Je bekijkt pagina 6 van 160
- 4 -
PARAMETER LIST
Model
RC-16
RC-25
RC-20
RC-22
Wattage(W)
1000
1700
1000
1350
G.W.(kg)
12.34
31.33
18.15
14.4
N.W.(kg)
12.84
32.13
18.75
14.9
Cutting speed
≤2.5s
≤4S
≤3s
≤3.5s
Max Rebar
16mm
25mm
20mm
22mm
Min Rebar
4mm
5mm
4mm
4mm
Note: There are two versions of the voltage of the above product model,
respectively, AC220-240V 50Hz and 120V 60Hz, please see the nameplate
information of the product.
INSTRUCTIONS
Caution: Indicates hazard that could result in minor personal injury and/or
product damage.
Care: Indicates hazard that will result in product damage.
Pre-use checks
Check oil level.
Check condition of cutter blocks and tightness of cutter block bolts.
Caution: Using loose or cracked cutter blocks may result in injury to
operators as well as damage to unit.
Check that the power source is appropriate for the cutter.
Care: If voltage is too high , the motor will burn out. If the voltage is too low,
insufficient power will be generated. Never use DC current.
Check that power supply is properly earthed.
Caution: Failure to earth power supply may result in electric shock to
operator.
Check that cord is undamaged and that plug is not loose.
Caution: Cut or abraded covering could result in a short and electric shock
to operator.
Bekijk gratis de handleiding van Vevor RC-22, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | RC-22 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22933 MB |
