Vevor RB-25 handleiding
Handleiding
Je bekijkt pagina 4 van 224
- 3 -
Bender should be on flat and steady ground before starting.
Any shaking may cause imprecise work.To avoid the safety accident,
please make sure the machine is not shaking before working.
8. OPERATION IS OFF, MAINTAIN THE MACHINE
Keep the machine clean and safe. After operation, clean and remove dust
and scrap iron in the main gear and body.
9. USE RECOMMENDED ACCESSORIES.
Before the service, replaces the fitting, or perhaps the assembly and
assembles the motor, must cut-off machine's power source from the power
source place (the note: Carries on the operation by the specialists).
10.POWER SUPPLY
①.The power source ,please connect with the single-phase 110V or 220V
(see the parameter in the machine ) power source to uses.
②.when connects to the power source RB-25 and RBC-25 must use 3.5 ~
5.5sq (cv) the power line . The power line is must maintain can below
30~40m to assure operation normally.
※ Reference--------in situation of use extend line
This product is set in the situation of far distance from the power to use the
extend line to connect, according to the thickness of line and the different
of current capacity , so must use the above provisions. Extension line. Use
line is too long or too thin will make the loss of electric current and overload
of the voltage, lead to edge of the wiring insulation rapid turn heat,then
insulating ability to reduce ,finally to leak electric poaer or fire.besides will
weaken the motor output force, internal electrical circuit easy to failure .
to began using the Line from the power line connect point must suit to the
provisions of the above extension line, also do not mean operation near the
electric power supply is good, in situation of long distance
operation,please refer to the table to using appropriate degree of power
Bekijk gratis de handleiding van Vevor RB-25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | RB-25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22625 MB |
