Vevor RB-25 handleiding
Handleiding
Je bekijkt pagina 20 van 224
- 19 -
Additional instructions for rebar cutter (Rebar cutter
and bender Model )
General Safety Precautions
Usage
Use rebar cutters on concrete re-forcing bars only.
Restrict use to designated materials
There is always a chance that the cut end may shoot out, especially if less
than 30cm in length. Exceeding designated material specifications greatly
increases this risk and will also damage the tool. Do not attempt to cut
rebars. Harder, thicker or thinner than those specified.
Use eye protection
Wear safety goggles , safety glassed with side shields or a face shield
when using cutter.
Provide safety barriers
Erect safety screens to protect co-workers from possible flying ends. Place
safety screen under the rebar when working in high places.
Exercise proper control
Hold cutter firmly and maintain proper footing and balance. Do not
over-reach when working in high place , secure cutter to scaffolding with a
safety rope. Check that power cord is not fouled and keep cord away from
sharp edges and heat. Check that all adjusting wrenches have been
removed before using cutter.
Guard Against electric shock
To avoid possible electric shock, do not handle cutter with wet hands or
use cutter in the rain or damp places. Be aware of all power lines, electric
Bekijk gratis de handleiding van Vevor RB-25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | RB-25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22625 MB |
