Vevor RB-25 handleiding
Handleiding
Je bekijkt pagina 13 van 224
- 12 -
or point1foot pedal switch control to operation.
Point 2,connect to work, The angle setby is point 2, through the foot switch
control operation, this time the point1 angle set by handle must establish
with point 2 in the same level angle or is bigger than the point 1 angle .
while also after the angle handle setting must fix well the handle nut or
when the machine operation will become loose.
④ Adjust the angle that you need by through move Left or right, after angle
adjustment is set accurately, assure that angle setting handle is fixed .
⑤The operator must stand outside of the rebar bender operation’s
direction.
⑥ when press the starting switch or the foot switch will bend the rebar to
the angle which you have set
⑦when you find some abnormal during the operation you must press down
emergency stopped to closes down the machine’operation.
⑧sure to remember, when bending processing, the angle of point 1 must
be bigger than point 2, otherwise the machine cannot the normal operation.
(This is for RB-25 AND RBC-25 , RB-32 AND RBC-32 is no problem .)
⑨ under situation of use foot switch beyond control machine’operation
when please through press nearby power light's hand switch test machine
whether to revolve judges the foot switch whether to present the
breakdown.
Note: ① when press the emergency switch to run the machine,the move
idler wheel will reture to its position.
② under the work situation of point 2 bending, the point 1 handle’position
must be keep the same level angle with point 2 or to set smaller in the
angle 5 degrees than the point 1 and then fix the angle handle, so that not
to occure the electricial or the machine misoperation.
※Matching of different wheel(RB-25 / RBC-25):
Rebar
specification
Fixed idler
wheel
Gyre idler
wheel
Contemporary
bending capacity
Ø22- Ø25
Ø78
Ø94
1 pcs
Bekijk gratis de handleiding van Vevor RB-25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | RB-25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22625 MB |
