Vevor NRB-32 handleiding
Handleiding
Je bekijkt pagina 4 van 96
- 2 -
SAFETY INSTRUCTIONS
Usage
Use NRB-22 NRB-25 RB-16 RN-22 NRB-32 rebar bender on concrete
re-inforcing bars only.
Restrict use to designated materials
Don’t use the machine to bend very hard rebar.The hard rebar may break
and will also damage the tool. Do not attempt to bend rebars.
Harder,thicker or thinner than those specified
Use eye protection
Wear safety goggles,safety glasses with side shields or a face shield while
using bender.
Provide safety barriers
Erect safety screens to protect co-workers from possible flying ends. Place
safety screen under the rebar when working in high places.
Guard Against electric shock
To avoid possible electric shock, do not handle cutter with wet hands or
use cutter in the rain or damp places. Be aware of all power lines, electric
circuits and other hazards that may be contacted , especially those that are
below the surface or otherwise hidden from view .
Unplug tool
Disconnect cutter from outlet when not in use and before cleaning,
adjusting or servicing. Do not disconnect plug from outlet by pulling the
cord. Always check that the switch lock if OFF before plugging in.
Beware of environment
Do not use cutter in the presence of flammable materials (e.g. Paint,
thinner,petroleum products, adhesives).
Bekijk gratis de handleiding van Vevor NRB-32, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | NRB-32 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7533 MB |
