Handleiding
Je bekijkt pagina 10 van 147
- 9 -
Issues
Cause/Suggestions
Refrigerator does
not work
·Check if the switch is on.
·Check if the plug and socket are connected well
·Check if the fuse has been burnt.
Check if the power supply is malfunctioned
·Switch on/off the fridge frequently may cause start
delay of the compressor
Refrigerator
compartments
are too warm
·The door is opened frequently.
·A large amount of warm or hot food was stored
recently
·The refrigerator has been disconnected for a long
time
Food is frozen
·The temperature was set too low
There is"water flow"
noise from inside the
refrigerator
·It's a normal phenomenon,caused by the flow of
refrigerant.
There are water
drops around the
refrigerator casing
or door gap
·It's a normal phenomenon,the moisture will
condense to water when it touches a cold surface of
the refrigerator.
The compressor is
slightly noisy when
starting
It's a normal phenomenon,the noise will be reduced
after the compressor works stably
Code F1displayed
·Possible cause:low voltage to fridge.
Adjust the battery protection from High to Medium
or from Medium to Low
Code F2 displayed
·Possible cause:condenser fan is overloaded.
Disconnect power to fridge for 5 minutes &re-start.
If the code shows again,contact manufacturer for
service
Bekijk gratis de handleiding van Vevor NL40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | NL40 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 15196 MB |
