Vevor LLE-002 handleiding
Handleiding
Je bekijkt pagina 9 van 96
2. Fiber strands installation on ceilings
1. Drill holes on the ceiling as
required by the pattern. Insert
the fiber strands into the holes
and glue them with the resin
adhesive. Cut the fiber ends
flush with the ceiling or leave
2-3mm protrusion
With end fittings
Fiber tail ends can be mounted with
end fittings to present more optical
effects.
2. The fiber strands cannot be
folded in half, and the bending
radius should not be less than
10mm.
Precautions:
1. Reasons and troubleshooting methods for the remote control being out
of control:
(1) Check whether the remote control indicator light is on. If the indicator
light is not on or the brightness is low, please replace the battery.
(2) If the remote control is out of control after replacing the battery,re-pair it.
(3) Ensure that the remote control is used within a range of 10 meters.
- 7 -
Bekijk gratis de handleiding van Vevor LLE-002, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | LLE-002 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6971 MB |
