Handleiding
Je bekijkt pagina 11 van 128
- 10 -
Safety devices
Safety Switch: The safety switch is equipped for
IB350CF/IB350CV/IB500LF/IB500LV/ IB750LF/IB750LV, to make
sure both hands are away from the blade while starting machine.
Overcurrent protection switch (Circuit breaker): This switch is
designed to protect the electrical circuit from damage caused by
excess current caused by an overload or short circuit. It interrupts
current flow after a fault is detected.
Note: To reset the machine, wait a few minutes till the motor cools
down, then restart the machine.
INSTALLATION
Packing and unpacking
Remove all packaging materials. Keep the packaging for future
storage.
After unpacking all accessories, read the manual carefully before
installation.
Make sure the delivery contents are complete and free of any
damage. If you find that parts are missing or show damage, do not
use the appliance but contact your dealer.
STARTING AND STOPPING THE BLENDER
Check that the on-off button (No.3) is in the released position.
Connect the appliance to the power supply.
Insert the tube or whisk into the appliance.
Press and hold down the safety button (No.1) if the appliance has.
Press the on-off button (No.3), and the blender will start up. Now, re
lease the safety button (No.1).
To stop the blender, release the on-off button (No.3), then blender
stop.
Bekijk gratis de handleiding van Vevor IB350CV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | IB350CV |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 8898 MB |
