Vevor HS-20-ACA handleiding
Handleiding
Je bekijkt pagina 5 van 73
- 4 -
WARNING: Hot Surfaces
Do not touch fan motor when in use . This motor is hot when in use . to avoid
burns , do not let bare skin touch hot surfaces.
WARNING: Fire Hazard
Fans have arcing or sparking parts inside . Do not use near combustible materials
or flammable gases or sources of heat.
DO NOT USE in areas where gasoline , paint or flammable materials are used
or stored . To prevent a possible fire , do not block air intakes or exhaust in any
manner . Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock , fire , or damage the fan.
WARNING: Electrical Shock Hazard
Do not use with damaged cord or plug . Use with adequate electrical
system that is up to code .
CAUTlON: to Prevent Electric Shock , this product has a three prong
grounded plug that must be inserted into a matching properly grounded outlet
to reduce the risk of electrical shock . Do not attempt to defeat this safety
feature.
WARNING: to Reduce the Risk of Fire or Electric Shock , do not use this
product with any solid-state speed control device.
Usage:
Fan Operation:
Always operate the fan in the upright position following all instructions and
recommendations listed in this manual.
Fan Location: Place the fan in the area of the room that will provide proper fan
cooling
Fan Connection: Be sure plug fits tightly in outlet . A loose connection may
cause overheating and damage to the plug or fan.
NOTE: To prevent overloading a circuit , do not plug the fan into a circuit that
is servicing other electrical needs.
Turning Fan On: Place fan on stable level surface . Plug fan into properly
grounded outlet . To start the fan , turn the switch from the OFF position to the
desired fan speed.
Turning Fan Off: To turn the fanoff , turn the switch from the current fan
speed setting to the off position . Remove plug from outlet.
Adjusting Fan Tilt: To adjust the tilt angle , use supplied knob wrench to
loosen the adjustment screw . After adjustment,retighten the adjustment screw
. Save knob wrench for future use.
Bekijk gratis de handleiding van Vevor HS-20-ACA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | HS-20-ACA |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 6162 MB |
